Sergey Gandzha

University

Federal State Educational Institution of Higher Education "South Ural State University (National Research University)"

English proficiency

 intermediate 

Code and name of the group of scientific specialties for which the postgraduate student will be accepted

2.4 Energy and electrical engineering

List of research projects of a potential supervisor (participation / leadership)

1. Project carried out within the framework of Decree No. 218 "Creation of the production of a model range of microturbine units of a new generation" (code 2013-218-04-058) 2013-2016 . (executor)

2. Development of impact-resistant composite materials and structures for floating armored vehicles. RSF Project No. 14-19-00327, 2014-2016 . (executor)

3. Development of an asynchronized synchronous generator with a control system for innovative wind turbines of medium and high power. RSF project 19-19-00109, 2019 (head)

4. Fundamental research on the creation of a combined magnetic and gas-dynamic suspension for a model range of high- speed microturbine power plants of a new generation. RFBR project 20-38-90175 (head)

List of possible research topics

  1. Development of electric transmission for hybrid and electric transport
  2. Development of a adual power generator for a number of medium and large wind turbines
  3. Development of valve machines with axial magnetic flux
  4. Development of valve machines with combined excitation
  5. Development of magnetic suspension for high-speed electrical machines
  6. Development of an energy storage device based on fuel cells
  7. Development of a magnetohydrodynamic engine for mixing aluminum melt

 

 

Research Supervisor:

Sergey A. Gandzha

Doctor of Science

Federal State Educational Institution of Higher Education "Ural Federal Institute named after the first President of Russia B.N. Yeltsin"

Development of valve electric drives for general industrial and special purposes

Supervisor 's research interests (more detailed description of scientific interests):

  1. development of low and medium power electric drives based on valve electric machines,
  2. design of special electrical machines for automation systems,
  3. development of wind power plants

The topic of the doctoral dissertation is valve electric machines with axial magnetic flux. Analysis, synthesis, implementation in production

Research highlights (if available):

Use of Licensed Software

Supercomputer of SUSU

Supervisor 's _ specific requirements :

  1. Master's degree in energy and electrical engineering

 

Supervisor's main publications 

Publication activity data

RINC SPIN code : 7658-3690, AuthorId : 560659

WoS ResearcherId : V-4098-2018

Scopus ID :57170771300

ORCID : 0002-4969-3253

Number of publications in Scopus 29

h - index 7

Significant publications in the last 5 years

  1. [Q1 - Top-10 %]  Samiee , L. Power to methanol technologies via CO2 recovery: CO2 hydrogenation and electrocatalytic routes / L.. Samiee , SA Gandzha //Reviews in Chemical Engineering.– 2019 No. 01678299 https://www.degruyter.com/view/j/revce.ahead-of-print/revce-2019-0012/re...
  2. Reviews in Chemical Engineering, 20190012, ISSN (Online) 2191-0235, ISSN (Print) 0167-8299, DOI: https://doi.org/10.1515/revce-2019-0012. JCR Science Edition Q1 SJR 2018 1.02 , Web of Science Core Collection Q1, Scopus Q1.
  3. Gandzha , SA Development of engineering method for calculation of magnetic systems for brushless motors based on the finite element method / SA Gandzha , DS Aminov , BI Kosimov //2019 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2019.– 2019 https://ieeexplore.ieee.org/document/8742976 DOI: 10.1109/ICIEAM.2019.8742976
  4. [Scopus]   Kosimov , B. Gandzha , S. , Aminov , D. , ... Gulov , D. , Abdulloev , I. Development brushless direct current electric motor of the Pilger mill drive for the technology of seamless pipes manufacturing based on the magnetic system with claw-poles . IOP Conference Series: Materials Science and Engineering Volume 950, Issue 1, 6 November 2020, Number of article 0120042020 International Conference on Advanced Problems of Electrotechnology , APET 2020; Ural Federal University Yekaterinburg ; Russian Federation; October 2020; Code 164820, ISSN: 17578981, DOI: 10.1088/1757-899X/950/1/012004
  5. Dilovar , G. , Gandzha , S . Research of Inter-turn Short-circuit of a Synchronous Generator with Permanent Magnet . September 25, 2020, Number articles 9234366, Pages 128-1322020 Russian Workshop on Power Engineering and Automation of Metallurgy Industry: Research and Practice, PEAMI 2020; Magnitogorsk; Russian Federation; 25 September 2020 to 26 September 2020; CFP20T53-ART; Code164530, ISBN: 978-172816230-0, DOI: 10.1109/PEAMI49900.2020.9234366
  6. Neustroev , N. , Gandzha , S . , Chuyduk , IA Passive Magnet Bearing Development for Axial Flux Permanent Magnet Generator with Diamagnetic Armature . September 25, 2020, Number articles 9234313, Pages 98-1022020 Russian Workshop on Power Engineering and Automation of Metallurgy Industry: Research and Practice, PEAMI 2020; Magnitogorsk; Russian Federation; 25 September 2020 to 26 September 2020; CFP20T53-ART; Code 164530, ISBN: 978-172816230-0, DOI: 10.1109/PEAMI49900.2020.9234313
  7. Aminov , D. , Gandzha , S. Kosimov , B. Technology of Using a Combined Excitation Valve Hydrogenerator as an Alternative Source of Energy use for Small Rivers
  8. September 25, 2020, Number articles 9234384, Pages 124-1272020 Russian Workshop on Power Engineering and Automation of Metallurgy Industry: Research and Practice, PEAMI 2020; Magnitogorsk; Russian Federation; 25 September 2020 to 26 September 2020; CFP20T53-ART; Code 164530, ISBN: 978-172816230-0, DOI: 10.1109/PEAMI49900.2020.9234384
  9. Gandzha , S. , Aminov , D. , Sogrin , A. Development of water submersible gyro generator of combined excitation for energy development of small and medium rivers / Proceedings - 2020 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2020May 2020, Issue articles 91120842020 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2020; Sochi; Russian Federation; 18 May 2020 to 22 May 2020;CFP20F42-ART; Code 160947, ISBN: 978-172814590-7, DOI: 10.1109/ICIEAM48468.2020.9112084
  10. Gandzha , S. , Aminov , D. , Kosimov , B. , ... Davlatov , A. , Mahmudov , A. Development of a concept of an energy-efficient house for an environmentally friendly settlement in the South Ural . Volume 140, 18 December 2019, Issue articles 110092019 International Scientific Conference on Energy, Environmental and Construction Engineering, EECE 2019; Congress Center of Peter the Great St. Petersburg Polytechnic University, Conference hall of the Ambassador Hotel5-7 Rimsky-Korsakov str.Saint -Petersburg; Russian Federation; 19 November 2019 to 20 November 2019; Code 155823, ISSN: 25550403, DOI: 10.1051/e3sconf/201914011009
  11. Gandzha , S. , Kosimov , B. , Aminov , D. Development of Analysis Methods for Claw-Pole Synchronous Motor of the Pilger Mill for Seamless Pipes Manufacturing . Proceedings - 2019 IEEE Russian Workshop on Power Engineering and Automation of Metallurgy Industry: Research and Practice, PEAMI 2019October 2019, Number of article 8915343, Pages 18-232019 IEEE Russian Workshop on Power Engineering and Automation of Metallurgy Industry: Research and Practice, PEAMI 2019 ; Magnitogorsk; Russian Federation; 4 October 2019 to 5 October 2019; CFP19T53-ART; Code 155640, ISBN: 978-172810993-0, DOI: 10.1109/PEAMI.2019.8915343
  12. Gandzha , S. , Aminov , D. , Kosimov , B. Application of the Combined Excitation Submersible Hydrogenerator as an Alternative Energy Source for Small and Medium Rivers . Proceedings - 2019 IEEE Russian Workshop on Power Engineering and Automation of Metallurgy Industry: Research and Practice, PEAMI 2019October 2019, Number of article 8915294, Pages 30-352019 IEEE Russian Workshop on Power Engineering and Automation of Metallurgy Industry: Research and Practice, PEAMI 2019 ; Magnitogorsk; Russian Federation; 4 October 2019 to 5 October 2019; CFP19T53-ART; Code 155640, ISBN: 978-172810993-0, DOI: 10.1109/PEAMI.2019.8915294
  13. Gandzha , S. , Kosimov , B. , Aminov , D. Development of system of multi-level optimization for brushless direct current electric machines . Proceedings - 2019 International Ural Conference on Electrical Power Engineering, UralCon 2019October 2019, Number of article 8877650, Pages 355-3602019 International Ural Conference on Electrical Power Engineering, UralCon 2019; Chelyabinsk; Russian Federation; 1 October 2019 to 3 October 2019; CFP19URL-ART; Code 153094, ISBN: 978-172811743-0, DOI: 10.1109/URALCON.2019.8877650
  14. Ganja , S. , Kotov , A. , Neustroev , N. Geometry optimization of asynchronous synchronous alternator with using generalized variables . Proceedings - 2019 International Ural Conference on Electrical Power Engineering, UralCon 2019October 2019, Number of article 8877634, Pages 373-3772019 International Ural Conference on Electrical Power Engineering, UralCon 2019; Chelyabinsk; Russian Federation; 1 October 2019 to 3 October 2019; CFP19URL-ART; Code 153094, ISBN: 978-172811743-0, DOI: 10.1109/URALCON.2019.8877634
  15. Gandzha , S. , Aminov , D. , Kosimov , B. Development of engineering method for calculation of magnetic systems for brushless motors based on finite element method . 2019 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2019March 2019, Number of article 87429762019 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2019; Sochi; Russian Federation; 25 March 2019 to 29 March 2019; CFP19F42-ART; Code 149030, ISBN: 978-153868119-0, DOI: 10.1109/ICIEAM.2019.8742976
  16. Gandzha , S. , Kosimov , B. , Aminov , D. Selecting optimal design of electric motor of pilgrim mill drive for manufacturing techniques seamless pipe . 2019 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2019March 2019, Number of article 87429412019 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2019; Sochi; Russian Federation; 25 March 2019 to 29 March 2019; CFP19F42-ART; Code 149030, ISBN: 978-153868119-0, DOI: 10.1109/ICIEAM.2019.8742941

 

Results of intellectual activity ( with stock )

(The most significant results of intellectual activity)

Full-time participation in 12 international conferences and competitions with the presentation of reports and projects

1. International scientific and technical conference " Prom -Engineering" 2018. Chelyabinsk, Novocherkask , Moscow. (2 reports).

2. International scientific conference "Digital industry: state and development prospects". Chelyabinsk. 2018. ( 1 report)

3. International scientific conference "Renewable energy, energy and resource saving" Chelyabinsk. 2018. ( 2 reports)

4. International scientific and technical conference " Prom -Engineering" 2017. Chelyabinsk, Novocherkask , Moscow. (2 reports).

5. International multidisciplinary scientific and technical conference. Austria . Vienna . 2017. Extended Scientific Sessions of 17th International multidisciplinary scientific conference on EARTH and GEO Sciences (2 reports )

6. International competition "International award "Small power - big achievements"". 2017. (1 project)

7. International competition "International award "Small power - big achievements"". 2016. (1 project)

8. International scientific and technical conference " Prom -Engineering" 2016. Chelyabinsk, Novocherkask , Moscow. (2 reports).

9. International multidisciplinary conference. Austria. Vein. 2016. International Scientific Conference on Earth and GEO Sciences SCEM VIENNA GREEN 2016, (1 report )

10. International scientific and technical conference "RENEWABLE ENERGY XXI CENTURY: ENERGY AND ECONOMIC EFFICIENCY". Moscow. 2016. (1 report)

11. International scientific and technical conference " Prom -Engineering" 2015. Chelyabinsk, Novocherkask , Moscow. (2 reports).

12. International competition "International award "Small power - big achievements"". 2015. (1 project)

 

Patents for inventions

  1. Pat. (invention) 2244996, Russian Federation, IPC H02K 19/16 1/06. Alternating current generator / S.A. Ganja , E.V. Solomin, A.D. Shaufler . - No. 2003124088/09; dec . 07/31/2003; publ . 01/20/2005, Bull . No. 2. - 3s.
  2. Pat. (invention) 2015606 Russian Federation, Electric motor, S.A. Ganja, 1994 , Application number: 5039128/07
  3. Pat. (invention) 2007009, Russian Federation, Asynchronous capacitor motor. Babakhin V.N., Ganja S.A., Karpov V.N., Silov S.N., Terekhovkin S.A., 1994 , Application number: 4890541/07
  4. Pat. (invention) 2030059 Russian Federation, Electric motor, S.A. Ganja, 1995 , Application number: 5030007/07
  5. Pat. (utility model) 56524, Russian Federation, Motor-reducer, Ganja S.A., Fedorov V.B., Kuleshov V.V., Smirnov V.A., 2006 , Application number: 2006115854/22
  6. Pat. (utility model) 66635 Russian Federation, Asynchronous synchronous generator, Gandzha S.A., 2007 , Application number: 2007112437/22
  7. 7.Pat. (invention) 2488211 Russian Federation, Electric motor, Ganja S.A., Krivosheev N.S., Ufimtsev S.A., 2013, Application number: 2011152956/07

 

 

You are reporting a typo in the following text:
Simply click the "Send typo report" button to complete the report. You can also include a comment.