Остовари Могаддам Ахмад

E-mail: 
ostovarim[at]susu[dot]ru
Индекс Хирша: 
РИНЦ 0
Scopus 0
Web of Science 0
Статьи и монографии за последние три года: 
(CoFeMnCuNiCr)3O4 High-Entropy Oxide Nanoparticles Immobilized on Reduced Graphene Oxide as Heterogeneous Catalysts for Solvent-Free Aerobic Oxidation of Benzyl Alcohol / Mehrabi-Kalajahi, S. //ACS Applied Nano Materials.–2024.–Vol. 7 No. 5.– P.5513-5524
Effect of intermetallic compounds on the high-temperature oxidation resistance of Al0.25CoCrFeNiCuAux (x = 0, 0.1, 0.3) high-entropy alloys / Samoilova, O. //Materials Today Communications.–2024.–Vol. 38
Embracing entropy in glass-ceramics / Ostovari Moghaddam, A. //Ceramics International.–2024.–Vol. 50 No. 17.– P.29178-29184
Enhancing the mechanical properties of high-entropy alloys through severe plastic deformation: A review / Naseri, M. //Journal of Alloys and Metallurgical Systems.–2024.–Vol. 5
Microstructural Evolution of High-Entropy Intermetallic Compounds during Detonation Spraying / Ostovari Moghaddam, A. //Metals.–2024.–Vol. 14 No. 1
Modified embedded-atom method interatomic potentials for the Al-Mn, Ti-Mn and Cu-Mn binary alloys / Ostovari Moghaddam, A. //Materials Letters.–2024.–Vol. 359
Structural characteristics and corrosion properties of Cu/Sn–Pb composite produced by accumulative roll bonding process / N.. Malmir //Archives of Civil and Mechanical Engineering.–2024.–Vol. 24 No. 3
The behavior of Al0.5CoCrFeNiCuPt0.3 high-entropy alloy during high-temperature oxidation / Samoilova, O. //HIGH TEMPERATURE CORROSION OF MATERIALS.–2024
Upgrading the strength-ductility trade-off and wear resistance of Al0.25CoCrFeNiCu and Al0.45CoCrFeNiSi0.45 high-entropy alloys through severe cold rolling process / Naseri, M. //Materials Today Communications.–2024.–Vol. 38
A 3d-4d-5d High Entropy Alloy as a Bifunctional Oxygen Catalyst for Robust Aqueous Zinc–Air Batteries / R.. He //Advanced Materials.–2023.–Vol. 35 No. 46
A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance / R.. He //Energy Storage Materials.–2023.–Vol. 58.– P.287-298
Corrosion Resistance of Al0.5CoCrFeNiCuxAgy (x=0.25, 0.5
y=0, 0.1) High-Entropy Alloys in 0.5M H2SO4 Solution / Samoilova, O. //Materials.–2023.–Vol. 16 No. 9
Detonation Spraying of Ni-Based Composite Coatings Reinforced by High-Entropy Intermetallic Particles / Ostovari Moghaddam, A. //Metals.–2023.–Vol. 13 No. 11
Effect of Au addition on the corrosion behavior of Al0.25CoCrFeNiCu0.25 high-entropy alloy in 0.5 M H2SO4 solution / Samoilova, O. //Materials Letters.–2023.–Vol. 350
Effect of Pt Addition on the Oxidation and Corrosion Resistance of Al0.25CoCrFeNi High-Entropy Alloy / Samoilova, O. //Metals.–2023.–Vol. 13 No. 10
High-entropy alloy coating deposition by detonation spraying combined with heat treatment / I.. Batraev //International Journal of Advanced Manufacturing Technology.–2023.–Vol. 129 No. 5-6.– P.2647-2659
Improving strength-ductility synergy of nano/ultrafine-structured Al/Brass composite by cross accumulative roll bonding process / Naseri, M. //Journal of Materials Research and Technology.–2023.–Vol. 26.– P.6794-6806
Insights into the Mechanical Properties and Correlation Between Strain Path and Crystallographic Texture of the AA2024 Alloy During Severe Plastic Deformation / Naseri, M. //Metals and Materials International.–2023
Lashkari, A.. Stabilizing digenite supercells amid Ni-doped off-stoichiometric bornite nanoparticles as a new approach for achieving ultra-low thermal conductivity / A.. Lashkari, A.. Ostovari Moghaddam, A.. Shokuhfar //Applied Physics A: Materials Science and Processing.–2023.–Vol. 129 No. 5
Microsegregation in high-entropy intermetallic compounds / Trofimov, E. //Journal of Alloys and Compounds.–2023.–Vol. 934
Microstructure and Wear Behavior of Al0.25CoCrFeNiSi0.6 High-Entropy Alloy Coating Deposited on Stainless Steel by Detonation Spraying / Samoilova, O. //Journal of Thermal Spray Technology.–2023
On the impact of using alumina nanoparticles and initial aging on the microstructure and mechanical properties of the AA1050/AA2024 nanostructure composite, created by accumulative roll bonding (ARB) method / H.. Roghani //Wear.–2023.–Vol. 526-527
Ostovari Moghaddam, A. Semi-ordered high entropy materials: The case of high entropy intermetallic compounds / A.. Ostovari Moghaddam, R.. Fereidonnejad, A.. Cabot //Journal of Alloys and Compounds.–2023.–Vol. 960
Study of the Influence of V, Mo and Co Additives on the Carbide Formation and Microhardness during Thermal Diffusion Chrome Planting of X35CrNi2-3 Steel / Shaburova, N. //Coatings.–2023.–Vol. 13 No. 1
Synthesis and characterization of high entropy carbide-MAX two-phase composites / A.. Lashkari //Journal of Materials Research and Technology.–2023.–Vol. 24.– P.5024-5031
Synthesis and characterization of intermetallic compounds with one medium- or high-entropy sublattice occupied by p-block elements / Trofimov, E. //Materials Chemistry and Physics.–2023.–Vol. 301
Synthesis and Characterization of Nanocrystalline High Entropy Heusler Intermetallics Powders / Ostovari Moghaddam, A. //Metals and Materials International.–2023
Synthesis and characterization of novel high entropy Heusler intermetallics / Ostovari Moghaddam, A. //Intermetallics.–2023.–Vol. 159
SYNTHESIS OF PBFE2.4X2.4Y2.4GA2.4IN2.4O19 HIGH-ENTROPY OXIDES WITH THE MAGNETOPLUMBITE STRUCTURE / Zaitseva, O. //Nanosystems: Physics, Chemistry, Mathematics.–2023.–Vol. 14 No. 3.– P.354-362
Ultrafine lamellar microstructures for enhancing strength-ductility synergy in high-entropy alloys via severe cold rolling process / Naseri, M. //Journal of Alloys and Compounds.–2023.–Vol. 965
Unraveling new single phase high entropy stannide by experimental screening of the as-cast samples / Trofimov, E. //Materials Letters.–2023.–Vol. 335
Al0.25CoCrFeNiSi0.6 high entropy alloy with high hardness and improved wear resistance / Samoilova, O. //Materials Letters.–2022.–Vol. 328
CoFeNiMnZnB as a High-Entropy Metal Boride to Boost the Oxygen Evolution Reaction / X.. Wang //ACS applied materials & interfaces.–2022.–Vol. 14 No. 42.– P.48212-48219
Corrosion Resistance of Alx CoCrFeNiM (M = Ti, V, Si, Mn, Cu) High Entropy Alloys in NaCl and H2 SO4 Solutions / S.. Pratskova //Metals.–2022.–Vol. 12 No. 2
Effect of Electromagnetic Pulses on the Microstructure and Abrasive Gas Wear Resistance of Al0.25CoCrFeNiV High Entropy Alloy / Samoilova, O. //Coatings.–2022.–Vol. 12 No. 5
Effect of processing parameters on the microwave assisted aluminothermic reduction of molybdenite / R.. Rafiei //International Journal of Refractory Metals and Hard Materials.–2022.–Vol. 109
Enhanced thermoelectric performance of CuAlS2 by adding multi-walled carbon nanotubes / M.. Shojaei //Advanced Powder Technology.–2022.–Vol. 33 No. 2
Entropy-stabilized metal oxide nanoparticles supported on reduced graphene oxide as a highly active heterogeneous catalyst for selective and solvent-free oxidation of toluene: a combined experimental and numerical investigation / S.. Mehrabi-Kalajahi //Journal of Materials Chemistry A.–2022.–Vol. 10 No. 27.– P.14488-14500
Fereidonnejad, R. Modified embedded-atom method interatomic potentials for Al-Ti, Al-Ta, Al-Zr, Al-Nb and Al-Hf binary intermetallic systems / R.. Fereidonnejad, A.. Ostovari Moghaddam, M.. Moaddeli //Computational Materials Science.–2022.–Vol. 213
High entropy intermetallic coatings fabricated by detonation spraying / Ostovari Moghaddam, A. //Materials Letters.–2022.–Vol. 311
High temperature oxidation resistance of W-containing high entropy alloys / Ostovari Moghaddam, A. //Journal of Alloys and Compounds.–2022.–Vol. 897
Microstructural evolution of Al0.25CoCrFeNiCu and Al0.45CoCrFeNiSi0.45 high-entropy alloys during laser cladding / Samoilova, O. //Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.–2022
Novel high entropy intermetallic compounds: Synthesis and detonation spraying / Ostovari Moghaddam, A. //Intermetallics.–2022.–Vol. 146
Phase formation, microhardness and magnetic properties of FeNiCrV-TiNb, (NiCoFeCuMn)3(AlTi) and (FeNiCoCrMn)(MoCr) high entropy intermetallic compounds / Ostovari Moghaddam, A. //Journal of Alloys and Compounds.–2022.–Vol. 912
Segregation mediated design of single-phase refractory medium and high entropy intermetallic compounds with complete suppression of pest oxidation / Ostovari Moghaddam, A. //Journal of Alloys and Compounds.–2022.–Vol. 927
Segregation peculiarities in high entropy intermetallic compounds / Ostovari Moghaddam, A. //Materials Letters.–2022.–Vol. 318
Shaburova, N. Theory and Practice of Using Pulsed Electromagnetic Processing of Metal Melts / N.. Shaburova, V.. Krymsky, A.. Ostovari Moghaddam //Materials.–2022.–Vol. 15 No. 3
Изучение коррозионной стойкости высокоэнтропийного сплава Al0,5CoCrFeNi1,6Ti0,7 в морской воде / О.В. Самойлова //Вестник Южно-Уральского государственного университета. Серия «Металлургия».–2022.–Том 22 № 1.– C.33-41
A different attempt to improve the formability of aluminum tailor welded blanks (TWB) produced by the FSW / M.. Abbasi //International Journal of Material Forming.–2021.–Vol. 14 No. 5.– P.1189-1208
A modified version of friction stir welding process of aluminum alloys: Analyzing the thermal treatment and wear behavior / A.. Abdollahzadeh //Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.–2021.–Vol. 253 No. 10.– P.2291-2309
A novel intermediate temperature self-lubricating CoCrCu1-xFeNix high entropy alloy fabricated by direct laser cladding / Ostovari Moghaddam, A. //Tribology International.–2021.–Vol. 156
Additive manufacturing of high entropy alloys: A practical review / Ostovari Moghaddam, A. //Journal of Materials Science and Technology.–2021.–Vol. 77.– P.131-162
Comparison of the Weldability of AA6061-T6 Joint under Different Friction Stir Welding Conditions / A.. Abdollahzadeh //Journal of Materials Engineering and Performance.–2021.–Vol. 30 No. 2.– P.1110-1127
Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2−xS / Y.. Zhang //Nano Energy.–2021.–Vol. 85
Formation of metal composites by detonation spray of powder mixtures / V.. Ulianitsky //International Journal of Advanced Manufacturing Technology.–2021.–Vol. 117 No. 1-2.– P.81-95
High-Temperature Oxidation Behavior of Al xCoCrFeNiM (M = Cu, Ti, V) High-Entropy Alloys / Shaburova, N. //Physical Mesomechanics.–2021.–Vol. 24 No. 6.– P.653-662
Influence of Colloidal Au on the Growth of ZnO Nanostructures / F.. Güell //Nanomaterials.–2021.–Vol. 11 No. 4
Influence of copper telluride nanodomains on the transport properties of n-type bismuth telluride / Y.. Zhang //Chemical Engineering Journal.–2021.–Vol. 418
Mechanical, wear and corrosion behaviors of AZ91/SiC composite layer fabricated by friction stir vibration processing / A.. Abdollahzadeh //Surface Topography: Metrology and Properties.–2021.–Vol. 9 No. 3
NbSe2 Meets C2N: A 2D-2D Heterostructure Catalysts as Multifunctional Polysulfide Mediator in Ultra-Long-Life Lithium–Sulfur Batteries / D.. Yang //Advanced Energy Materials.–2021.–Vol. 11 No. 36
Numerical Modeling and Experimental Analysis of Water Jet Spot Welding and Friction Stir Spot Welding: A Comparative Study / B.. Bagheri //Journal of Materials Engineering and Performance.–2021.–Vol. 30 No. 2.– P.1454-1471
Ostovari Moghaddam, A. Does the pathway for development of next generation nuclear materials straightly go through high-entropy materials? / A.. Ostovari Moghaddam, A.. Cabot, E.. Trofimov //International Journal of Refractory Metals and Hard Materials.–2021.–Vol. 97
Ostovari, A. Toward expanding the realm of high entropy materials to platinum group metals: A review / A.. Ostovari, E.. Trofimov //Journal of Alloys and Compounds.–2021.–Vol. 851
Phase formation and thermoelectric properties of Zn1+xSb binary system / Ostovari Moghaddam, A. //Transactions of Nonferrous Metals Society of China.–2021.–Vol. 31 No. 3.– P.753-763
Properties of WC–10%Co–4%Cr Detonation Spray Coating Deposited on the Al–4%Cu–1%Mg Alloy / Samodurova, M.N //Materials.–2021.–Vol. 14 No. 5
Recent development in friction stir processing of aluminum alloys: Microstructure evolution, mechanical properties, wear and corrosion behaviors / B.. Bagheri //Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.–2021
Single-Phase Medium- to High-Entropy Alloys Developed by a Simple Thermodynamic Approach / Ostovari Moghaddam, A. //JOM.–2021.–Vol. 73 No. 11.– P.3430-3438
Study on the effect of the welding environment on the dynamic recrystallization phenomenon and residual stresses during the friction stir welding process of aluminum alloy / M.. Abbasi //Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.–2021.–Vol. 235 No. 8.– P.1809-1826
Высокотемпературное окисление высокоэнтропийных сплавов систем AlxCoCrFeNiM (M = Cu, Ti, V) / Н.А. Шабурова //Физическая мезомеханика.–2021.–Том 24 № 4.– C.28-39
Fabrication of AZ91D/Cu/Mg2Cu and AZ91D/Mg2Cu/MgCu2/MgO in-situ hybrid surface nanocomposites via friction stir processing / M.. Farghadani //Surface Topography: Metrology and Properties.–2020.–Vol. 8 No. 4
Ostovari Moghaddam, A. Ball milling and post annealing as an effective route to synthesize Co1-x Cux SbS paracostibite thermoelectric material / A.. Ostovari Moghaddam, A.. Shokuhfar, A.. Cabot //Iranian Journal of Materials Science and Engineering.–2019.–Vol. 16 No. 4.– P.20-26
Вы нашли ошибку в тексте:
Просто нажмите кнопку «Сообщить об ошибке» — этого достаточно. Также вы можете добавить комментарий.